2.- Fasten the mounting bracket  to the pipe

Use a screwdriver
Hydrocare Water Softener
Hard Water Solutions At Home
Electronic Water Softener for the Home

Electronic Hard Water Solutions
Installation of the HS-38


1.- Find the best location:

The best place to install your HS-38 electronic water softener is on the cold water pipe that feeds the boiler or hot water tank. Make sure that you have a power outlet close by, and that there are no ground wires attached to the pipe in very close proximity. 
 
 One more thing to consider is to have a clear view of the HS-38 red light. It will be the indicator that the unit is performing as it should.
 

3.- Mount the top section of the HS-38

You will hear a "click" sound when you push it firmly into the bracket to let you know that the body of the HS-38 is in place
4.- Attach the lower section of the unit

Holding the top section with one hand, clip the lower section on with the other hand.
It is very important that once the bottom part is in position, you withdraw the split pin from the unit
6.- Power the unit with the power adapter supplied

First plug it into the unit then into any regular power outlet.
After powering the HS 38 unit, the red light should glow brightly and may have a slight flicker; that is the indication that the unit is working properly.


Copyright 2011: Water Soft Canada | Hard Water Solutions. All Rights Reserved.

Hydrocare Installation Instructions

5.- Remove the metal pin

It is very important that once the bottom part is in position, you withdraw the split pin from the unit


Feel free to contact us if you have any issues installing your Hydroflow,  we are always happy to help you with our product.